Diamond Tile and Masonry Saw Blades

Not exactly. While many blades are labeled multi-purpose for both concrete and masonry, dedicated concrete blades typically use a harder bond to handle rebar and aggregate, whereas masonry blades often use a softer bond suited to brick and block. Always check the bond type and application rating before use.

Many masonry blades can cut concrete, especially multi-purpose or all-cut designs, but performance depends on bond hardness and segment design. For cured or reinforced concrete, a blade specifically rated for concrete and rebar cutting will deliver better speed and longevity.

Segmented blades have gaps between segments for aggressive cutting and cooling, ideal for concrete and masonry. Turbo blades add a wavy segment pattern for faster, smoother cuts. Continuous rim blades have no gaps, producing the cleanest edges and are best suited for tile, porcelain, and stone.

Many diamond blades, including laser-welded segmented and turbo designs, are rated for both wet and dry use. However, some continuous rim tile blades are wet-only to prevent overheating. Always check the product's cutting method rating before switching between wet and dry applications.

Arbor sizes vary by blade diameter and saw type, commonly 5/8 inch, 7/8 inch, or 1 inch-20mm. Confirm your saw's spindle size and select a blade with a matching arbor or the correct bushing to ensure a secure, safe fit.

Bond hardness should be matched inversely to aggregate hardness: softer bonds for harder aggregate, harder bonds for softer or more abrasive aggregate like fresh green concrete. Using the wrong bond leads to premature wear or poor cutting speed, so bond selection is critical for job efficiency.