DM-5/8″ – Detroit Industrial Tool

Tuck Point Wheel – Premium

Thomas Evens — Mon, 20 Apr 2020 17:34:47 +0000

Designed to grind and repair mortar joints in stone or brick masonry walls.

They are an excellent value and provide very fast, clean cuts in mortar and grout joints.

Works well in both hard and soft aggregates.

Can be used wet or dry.

For use on hand grinders or hand saws.

Segment height - 10 mm

Carbide Tip Blade – Thin Kerf

Thomas Evens — Wed, 12 Feb 2020 18:34:49 +0000

Our line of carbide tip cutting blades, featuring formulated C-6 carbide grade – which, combined with Trip Chip Grind(TCG) or modified Alternate Top Bevel, lasts longer and resists breakage on impact. This is our thin kerf design with 'Anti-Kick Tooth' and the featuring an expansion slot.

Carbide Tip Blade – General Purpose

Thomas Evens — Tue, 11 Feb 2020 16:24:00 +0000

Our line of carbide tip cutting blades, featuring formulated C-6 carbide grade – which, combined with Trip Chip Grind(TCG) or modified Alternate Top Bevel, lasts longer and resists breakage on impact. This is our General Purpose Carbide Blade line, suitable for cutting a wide variety of materials.

Turbo Porcelain Tile Diamond Blade

Thomas Evens — Fri, 10 Jan 2020 22:33:13 +0000

Continuous turbo rim
Semi-wide turbo teeth
Wet or dry cutting

Premium Dry/Wet Tile Diamond Blade

Thomas Evens — Fri, 10 Jan 2020 22:30:49 +0000

This thin tile blade is agile and strong cutting through tile. Its continuous rim helps create precision cuts with minimal chipping.

Premium Green Concrete/Asphalt Diamond Blade

Thomas Evens — Fri, 10 Jan 2020 22:26:56 +0000

Premium laser welded blades with a specially formulated bond to provide precise cuts in asphalt, green concrete, and other abrasive material. Drop segments offer superior undercut protection to remove slurry with virtually no chipping.

Premium Turbo Granite/Hard Stone Diamond Blade

Thomas Evens — Fri, 10 Jan 2020 22:18:22 +0000

Features:

Continuous Rim
Semi-Wide Turbo Teeth
Rugged Aggressive Cut
10mm Segment Height
Wet or Dry Cutting

Applications:

Masonry
Concrete
Brick
Block
Pavers
Granite
Hard Stone

Equipment:

Angle Grinder
Circular Saw
Table / Masonry Saw
High Speed Saw

Premium Masonry Diamond Blade

Thomas Evens — Fri, 10 Jan 2020 22:15:24 +0000

Laser welded
Heavy duty performance
Extended life
Keyhole gullets
Polished core
Run wet or dry

Rescue Demolition Diamond Blade

Thomas Evens — Fri, 10 Jan 2020 21:59:22 +0000

An essential tool for fire departments and rescue crews. This blade has vacuum brazed diamond matrix for rugged aggressive cuts that are reliable in a variety of extreme situations. It is also much more impactful than abrasives due to less debris and greater safety. Featuring V-TECH Vacuum Brazed Technology V-TECH allows diamond particle to protrude up to ¾ out of the bond, much higher than that of sintering or electroplating, leaving a better clearance on tool surface, and significantly improving cutting efficiency & cooling. V-Tech creates a chemical bonding between diamond and matrix, permanently brazing the diamond to the substrate. The diamond crystal is retained on the tool in continuous cutting until totally wearing itself out. Therefore, the working life of V-TECH tools is highly increased over traditional tools.